- December 29, 2009 at 9:09 am #28889
I have broad band at my house but some times it doesn't recognize the signals at all and I can't browse anything…why is that?December 29, 2009 at 9:24 am #32691
Hi and welcome to the forum!I am sure we can help you out, but we are going to need just a little more information 😉1. Firstly, we will need you to define broadband.
Mitz from Tips4pcDecember 30, 2009 at 5:24 am #32692
Hi DakI have router and t computers are connected through it wirelessly and mine is the only one computer facing this problem.....Internet does not require any username or password, I use windows VistaDecember 31, 2009 at 10:43 am #32693
Often IP address problems can cause this behaviour. Your DHCP server may not be enabled, which means the router will not correctly assign an address. I would suggest you try this as the next step.Click the Start Orb, and go to your Control Panel.Open Network and Sharing Center.In the middle of the window, on the right of the window, select View Status.This brings up the Local Area Connection Status window. On the bottom left, click Properties.Click Continue when Windows prompts you to.You will see a window with This connection uses the following items.Highlight Internet Protocol Version 4 (TCP/IPv4)
Mitz from Tips4pcJune 18, 2011 at 2:35 am #32694
You need to configure your TCP/IP properties. You can get the settings from your Internet Service Provider.
You must be logged in to reply to this topic.