Bad Pool Caller Blue Screen Error

Free PC Matic Scan

What Is The Bad Pool Caller Error?

The “Bad Pool Caller” is a blue screen error which is constantly causing millions of computers around the World to run unreliably. Although this error does not have a central set of causes, it’s actually one of the easiest problems to fix thanks to a simple and effective method that you can use on any PC. This tutorial is going to show you exactly what to do to fix this error for good.

The “bad pool caller” error is shown when Windows is not able to access the data-pool that it requires to run. The data pool is the technical term used to describe all the settings and options that your computer may require whenever it’s running, and as you may have guessed, it’s constantly being “called” to help your computer run as smoothly as possible. Unfortunately, there are many occasions where Windows will try and call a setting from the data pool, only to have it show an error. To fix this, you should follow the steps below…

How To Fix The Bad Pool Caller Error

The first thing you need to do to fix this annoying computer error is to check to see if all your hardware is functioning properly. You can do this quite easily by looking through the various components & wires on your system, and make sure that they’re all securely locked into place. You should also make sure the power connection to your system is working fine as well.

After that, you should reinstall any affected programs. Many programs try and call files that they need to run, but it’s often the case that these files either don’t exist or are damaged. To make sure this is not a problem, you should reinstall any damaged program on your system.

You should also think about cleaning the “registry” of Windows. The registry is a large database which stores a series of information and settings that your computer requires to run, and is continually being used by all the software of your PC to help it ‘remember’ a lot of different settings and options that it might need. Unfortunately, the registry is also one of the biggest causes of errors as it’s used so much that it gets saved in the wrong way. This causes software to find it difficult to read the files it needs to run, leading your computer to slow down and cause the bad pool caller error. One of the most effective ways to cure this error is to use a registry cleaner to fix any of the damaged parts of the registry database, allowing your system to run much faster and smoother.

Free PC Matic Scan

You can fix bad pool caller very easily by using the tutorial and tools on our website. You can Click Here to fix the bad pool caller error on your system.

Article Source:


  1. Jesse says

    I don’t know if you guys get this, but my pc seems to have a schedule, sometimes it will freeze completely, and then it would be rebooted. While other times it would start glitching out completely. It does this around ten o clock every night. It wasn’t until today that it gave me the blue screen with “Bad Pool Caller.” I haven’t tried any of this yet, but i’m wondering if it’s generally the same type of problem

  2. andrew says

    I have a notebook that keeps showing this bad pool caller message. I have pressed f8 and tried every option safe mode, vga logging, the works but it just goes back to the blue screen. I have no disk drive either so cannot reinstall anything. I have been able to attach my hard drive to another pc and can see all my files but have no idea what to do next. When I hour up it seems to load files right up to one called mup.sys then gets the blue screen of death. HELP! I’m losing the will to live!

  3. says

    Had `bad pool` and `cache manager` – tried replacing hard drive but ended up it was a bad 2gb memory chip ddr3 sodimm – replacing that sorted it.

  4. oliver says

    Just saying thanks is not enough as this posts dictates your huge knowledge and capability. I had already faced this problem and got stucked in the middle. In that case, i had no option other than complete formatting of my Windows. But from now on, I will rectify this after reading the post..

    Thanks again.

  5. says

    I must say this is very informative post. Sometimes my PC create many problems for my as it stops working. So your post helped me a lot to learn the reasons and correct it. Thanks

  6. Todd says

    Hi Mitz, I was wondering what exactly this was called, now I have my answer.

    I did get blue screen of death randomly the other day on this computer for the first time, I really should have noted down what it said on the screen because now I’m not sure what to look for.

    Next time I’ll have a pen and paper handy :)

  7. says

    I keep getting Blue screens at random times display the following, it
    does not happen often but does happen a few times a day or once a day
    in a few days, this even happen before i reformatted.

    • says

      you might need to check your hardware then… If you have formatted, providing you have installed the right drivers for your devices, the only things left that are the same is the hardware… Check your stop error code next time and Google the error. Have your digital camera ready to take a picture of the error code if it is too fast for you to write down.

  8. says

    Blue screen error comes the wrong times, when you have much work to do! I think that cleaning the registry often with the right software, gets you away from such trouble. Especially when you work a lot with your computer hard disc defrag helps too.